Program Educational Objectives

Graduates of Electronics and Communication Engineering program should be able to

PEO1: : To design creative products and systems, identify and use relevant Electronic Design Automation (EDA) to meet real-world challenges in the Embedded Systems and Networking field.

PEO2: Pursue a career in embedded systems research by self-teaching and focusing on cutting-edge technology.

Programme Specific Outcomes (PSOs)

PSO1: Develop skills in Embedded Systems prototype development with an emphasis on IoT applications.

PSO2: Integration of embedded software and hardware for embedded system design techniques.

Programme Outcomes (POs)

PO1:An ability to independently carry out research / investigation and development work to solve practical problems.

PO2:An ability to write and present a substantial technical report / document.

PO3: Students should be able to demonstrate a degree of mastery over the area as per the specialization of the program. The mastery should be at a level higher than the requirements in the appropriate bachelor program.

I Semester
S. No. Code Subject L T P Credits
1 I6801 Digital System Design – I 4 -- -- 3
2 I5501 Embedded System Design 4 -- -- 3
3 I5502 Embedded Realtime Operating Systems 4 -- -- 3
4 I6805 Embedded - C 4 -- -- 3
5 I5703 Advanced Computer Architectuare 4 -- -- 3
6 I5504 Embedded Computing 4 -- -- 3
7 I5505 Embedded C- Lab -- -- 3 2
Total Credits 20
II Semester
S. No. Code Subject L T P Credits
1 J5501 Hardware Software Co-design 4 -- -- 3
2 J6805 Digital Signal Processors and Architectuare 4 -- -- 3
3 J5502 Embedded Networking 4 -- -- 3
4 J4506 Internet Protocols 4 -- -- 3
5 J5702 System on Chip Design 4 -- -- 3
6 J6809 CPLG and FPGA Architectuares and Applications 4 -- -- 3
7 J5505 Embedded System Design Laboratory -- -- 3 2
Total Credits 20
III Semester
S. No. Subject L T P Credits
1 Comprehensive Viva-Voce -- -- -- 2
2 Seminar-I -- -- -- 2
3 Project Work Part-I -- -- -- 16
Total Credits 20
IV Semester
S. No. Subject L T P Credits
1 Seminar-II -- -- -- 2
3 Project Work Part-II -- -- -- 18
Total Credits 20


I Semester
S. No. Code Subject L T P Credits
1 M5501 Embedded System Design 3 0 0 3
2 M5502 Microcontrollers and Programmable Digital Signal Processors 3 0 0 3
3 M5503 Digital Signal and Image Processing 3 0 0 3
4 M5508 CAD of Digital System 3 0 0 3
5 M0109 Research methodology and IPR 2 0 0 2
6 M5509 Embedded System Design Lab 0 0 4 2
7 M5510 Microcontrollers and Programmable Digital Signal Processors Lab 0 0 4 2
8 Audit course-1 2 0 0 0
Total Credits 18
II Semester
S. No. Code Subject L T P Credits
1 N5501 Digital System Design 3 0 0 3
2 N5502 Real Time Operating Systems 3 0 0 3
3 N5503 Memory Architectures 3 0 0 3
4 N5506 Communication Buses and Interfaces 3 0 0 3
5 N5509 Real Time Operating Systems Lab 0 0 4 2
6 N5510 Digital System Design Lab 0 0 4 2
7 Mini Project 0 0 4 2
8 Audit Course – 2 2 0 0 0
Total Credits 18

Program Name M.Tech in Embedded Systems
Level Post Graduation
Program Specific Enquiries 0863-2381244
Admission Enrollment and General Enquiries 0863-2381200
HoD Contact Number +91 8885423258